Descargar Imprimir esta página

Tunturi Cardio Fit Bike 30 Manual Del Usuario página 16

Ocultar thumbs Ver también para Cardio Fit Bike 30:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 64
English
Heart rate
Pulse rate measurement
(hand pulse sensors)
The pulse rate is measured by sensors in the
handlebars when the user is touching both
sensors at the same time. Accurate pulse
measurement requires that the skin is slightly
moist and constantly touching the hand pulse
sensors. If the skin is too dry or too moist,
the pulse rate measurement will become less
accurate.
‼ NOTE
Do not use the hand pulse sensors in
combination with a heart rate chest belt.
If you set a heart rate limit for your workout,
an alarm will sound when it is exceeded.
Maximum heart rate
(during training)
The maximum heart rate is the highest heart rate
a person can safely achieve through exercise
stress. The following formula is used to calculate
the average maximum heart rate: 220 - AGE. The
maximum heart rate varies from person to person.
⚠ WARNING
Make sure that you do not exceed your
maximum heart rate during your workout.
If you belong to a risk group, consult a
physician.
Beginner
50-60% of maximum heart rate
Suitable for beginners, weight-watchers,
convalescents and persons who have not
exercised for a long time. Exercise at least three
times a week, 30 minutes at a time.
Advanced
60-70% of maximum heart rate
Suitable for persons who want to improve and
maintain fitness. Exercise at least three times a
week, 30 minutes at a time.
Expert
70-80% of maximum heart rate
Suitable for the fittest of persons who are used to
long-endurance workouts.
16
Use
Adjusting the support feet
The equipment is equipped with 2 support feet. If
the equipment is not stable, the support feet can
be adjusted.
- Turn the support feet as required to put the
equipment in a stable position.
‼ NOTE
The machine is the most stable when all
support feet are turned fully in. Therefore
start to level the machine by turning all
support feet fully in, before turning out the
required support feet to stable the machine.
Adjusting the horizontal seat position
The horizontal seat position can be adjusted by
setting the seat to the required position.
- Loosen the seat adjustment knob.
- Move the seat to the required position.
- Tighten the seat adjustment knob.
Adjusting the vertical seat position
The vertical seat position can be adjusted by
setting the seat tube to the required position.
With the leg almost straight, the arch of the foot
must touch the pedal at its lowermost point.
- Loosen the seat tube adjustment knob.
- Move the seat tube to the required position.
- Tighten the seat tube adjustment knob.
Adjusting the handlebar
The handlebar can be adjusted according to the
height and the exercise position of the user.
- Loosen the handlebar adjustment knob.
- Move the handlebar to the required position.
- Tighten the handlebar adjustment knob.
Power supply (Fig. E)
The trainer is powered by an external power
supply. Refer to the illustration to locate the
trainer power input.
‼ NOTE
Connect the power supply with the trainer
before connecting it to the wall outlet.
Always remove power cord when
machine is not in use.

Publicidad

loading