Publicidad
Idiomas disponibles
Idiomas disponibles
Features:
Powerful beam-effect with LED technology!
Two beam-balls rotate around their own axis plus around the effect's main axis • 30 beams are thrown
whirlwind-like throughout the room • Brilliant, intensive colors • Hanging or standing installation possible •
When smoke is used, this effect becomes especially attractive • Easy installation • Sound-control via built-in
microphone • Auto or Sound control mode selectable via switch • Rotation speed adjustable via rotary control
• Very compact housing with comfortable carrying handle • 4 high-power TCL LEDs • Through the close chip
placement of the multichip technology, an exquisite color mix even with short distances to the illuminated
surface is guaranteed • Advantages of high-power LED-technology: extreme light output, extremely long life,
low power consumption, defacto maintenance free • Ready for connection with power cord and safety-plug •
Delivered in a four-color carton
INSTALLATION
Rigging
When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
Hanging installation
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
Procedure:
The device should be installed outside areas where persons may walk by or be seated.
DANGER OF FIRE!
Attention: Permanent installation is recommended!
14/30
00046913.DOC, Version 1.1
Publicidad
