Viper 4218V Guía De Propietario página 4

The runtime on the remote starter is predetermined based on vehicle
application. The remote starter will shut down when the preset runtime
times out or when any shutdown zone becomes active.
Note
Refer to the Quick Reference Guide for more information.
Unlock
Press
and release the button.
Unlock function will only work when the vehicle is remote started. The
remote responds with 2 short beeps and the green LED on the remote
flashes once. The vehicle responds by flashing the parking lights twice
to confirm unlocking.
Shut Off the Remote Start
Press
and hold the button for 3 seconds.
The vehicle shuts down from the remote start mode. The remote plays
the remote start shut off tone and the orange LED flashes 1 time.
The remote starter will also shut down when the preset runtime times out
or when any shutdown zone becomes active.
Note
Refer to the Quick Reference Guide for more information.
Additional Remotes
This device does not support end user programming. To add a new
remote, please consult your local 12-volt retailer to have one pro-
grammed for you.
© 2012 Directed. All rights reserved.
All manuals and user guides at all-guides.com
3