Publicidad
Idiomas disponibles
Idiomas disponibles
I
Suitable receptacles
Only use pans bearing the symbol.
Important:
to avoid permanent damage to the surface of the table, do not use:
• receptacles with an imperfectly flat base;
• metal receptacles with enamelled bases;
• receptacles with a rough base to avoid scratching the surface of the hob;
• never place hot pots and pans on the surface of the hob control panel.
Not all cookware suitable for induction works efficiently due to bases partly made of ferromagnet-
ic material! When purchasing pots or pans, check that:
• the base is completely made of ferromagnetic material. Otherwise, both heat transmission effi-
ciency and heat uniformity are lowered, resulting in unsuitable pan/pot surface temperatures for
cooking.
• The Base does not contain aluminium: it does not heat up and may not even be recognised by
the inductors.
• Bases that are not flat or have a rough surface.
They subtract from the contact surface between inductor and dish, lowering its efficiency and
worsening the firing experience.
Important: never place hot pots and pans on the surface of the hob control panel, drawn on the
hob.
Never use receptacles made of: normal fine steel, glass, terracotta, copper and aluminium.
Do not place any empty receptacles on the cooking zone. It could cause damage.
Pans from which liquids completely evaporate can cause damage to the glass-ceramic hob, for
which the manufacturer accepts no liability. Existing receptacles
You can check whether the pan material is magnetic with a simple magnet. Pans are not suitable
if they are not magnetically detectable. The indications given in the previous paragraph also apply
in this case
WARNINGS
AVVERTENZE
30
30
EN
Publicidad
