AIRFORCE POP 80-4 Manual De Montaje Y Modo De Empleo página 34

I AVVERTENZE OPERATION AVVERTENZE EN I
TOUCH CALIBRATION
The F / L error can be generated within about 3s of the initial power up. The user is advised to
switch off the hood lights and direct lighting towards the hob. After the touch control has con-
ducted the initial calibration process, (about 3s) any hood or other lighting can be turned on nor-
mally and will no longer affect the operation of the touch control.
COMMAND BLOCK
Button B blocks hob operation in its current state, preventing any unintentional operation (e.g. by
children). In this state, no action on the keys has any effect. To activate the safety function, press
button B until the warning light comes on. When the command lock is active, the hob can still be
switched off. In this case the command block remains active even when the hob is switched on
again. To deactivate the control lock, press button B until the warning light goes off.
SWITCHING ON THE HOB
To turn on the appliance, press key A , the displays will turn on in the standby position .
The control unit will remain active for 10 seconds. If no cooking zone is selected within this period,
the hob will switch off automatically.
TURNING ON THE COOKING ZONES
To select the desired cooking zone, press the relative key D and press the slider E within 10 seconds
to adjust its power. The power of the individual cooking zone can be adjusted in 9 different posi-
tions, and will be shown on the relative luminous display with a number from "1 to 9".
BOOSTER
This function further reduces the cooking time of a given zone by bringing the temperature to ma-
ximum power for a 10-minute interval. At the end of this interval, the power of the cooking zone
automatically returns to level 9. The use of this function is indicated for heating large quantities of
liquids (e.g. water for cooking pasta) or dishes in a very short time. To activate this function, select
the cooking zone and act on slider E up to level 9. Act on slider E again, the symbol P will be shown
on the display relating to the zone.
PAUSE/RECALL
PAUSA / RICHIAMO (Stop & Go)
The function is activated by pressing the C key and allows for a temporary pause in coo-
king, allowing users to answer the door or the telephone without worrying about boiling wa-
ter. This function is also useful for cleaning the user interface surface without changing the
set cooking. The evidence that the interruption has taken place is because all the displays
light up with a message that rotates continuously. To restore cooking, press the button again
C, the hob will return to the original settings. 10 minutes after setting the pause, if cooking is not
restored, the hob will switch off.
pot recognition
If the symbol appears on one of the displays of a cooking zone, it means that: 1) the container
used is not suitable for cooking with 2) the diameter of the pan used is smaller than that permitted
by the appliance. 3) there is no saucepan on the plate.
34