ACDelco ANG201 Manual Información Del Producto página 5

1English1
appropriate personal protective equipment.
Always use personal protective equipment, which may include dust mask or
other breathing apparatus, safety glasses, ear plugs, gloves, apron, safety shoes,
hard hat and other equipment, appropriate to the tool used and material
worked.
The tool is not designed to work in explosive environments, including those
caused by fumes and dust, or near flammable materials.
The tool is not designed to insulate against electric shock.
Keep body, hands, loose clothing, long hair, watches, identifications, bracelets,
necklaces, neckwear and jewelry away from the working part of the tool.
Be aware of buried, hidden or other hazards in your work environment. Do not
contact or damage cords, conduits, pipes or hoses that may contain electrical wires,
explosive gases or harmful liquids.
Power tools can vibrate in use. Vibration, repetitive motions or uncomfortable
positions may be harmful to your hands and arms. Stop using any tool if discomfort,
tingling feeling or pain occurs. Seek medical advice before resuming use.
To avoid accidental starting - ensure tool is in "off" position before applying air
pressure, avoid throttle when carrying, and release throttle with loss of air.
Ensure work pieces are secure. Use clamps or vises to hold work piece whenever
possible.
Keep body stance balanced and firm. Do not overreach when operating this tool.
Anticipate and be alert for sudden changes in motion, reaction torques, or forces
during start up and operation.
Tool and/or accessories may briefly continue their motion after throttle is
released.
Do not carry or drag the tool by the hose.
Do not use power tools when tired, or under the influence of medication, drugs,
or alcohol.
Never use a damaged or malfunctioning tool or accessory.
Use accessories recommended by Durofix.
Do not modify the tool, safety devices, or accessories.
Do not use this tool for purposes other than those recommended.
Note the position of the reversing mechanism before operating the tool so as to
be aware of the direction of rotation when operating the throttle.
Exposed throttles shall not be used where obstructions can hold the throttle in
the "on" position.
Periodically check the drive end of the tool to make certain that the socket
retainer functions correctly, and that sockets and drive ends are not excessively
worn which may allow the socket to come off when rotating.
English -4