Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT
Please read
these
instructions carefully before you start to assemble this product
.
Please
carry
out
the
steps in
the order
set
out
in
these
instructions.
Keep
these
instructions
in
a
safe
place
for future
reference.
Safety advice
For
safety purposes we
strongly recommend the product to
be
assembled by at least
two
people.
Be
sure
to check that there
are no
hidden
pipes or cables
in
the wall before drilling.
Some parts may have sharp edges.
Please be
careful when handling components. Always wear
gloves,
eye
protection,
and long
sleeves
when assembling or performing any maintenance
on
your product.
Do
not
attempt
to assemble the product
in
windy or wet conditions.
Do
not
attempt
to assemble the product if you
are
tired,
have
taken drugs,
medications or alcohol, or if you
are
prone to dizzy
spells.
Dispose
of
all
plastic
bags safely
-
keep
them
away
from children's
reach.
Keep
children
away
from the assembly
area.
When using
a
stepladder or power tools, make
sure
that
you
are
following
the manufacturer's
safety advice.
Do
not climb or stand on the
roof.
Do
not hang or
lay
on the profiles.
Heavy articles should not
be
leaned against the poles.
Keep
roof
and
gutters
clear
of
snow,
dirt
& leaves.
Heavy snow load on
the roof
can make
it unsafe to stand below or nearby.
If
color
was
scratched
during
assembly it
can be
fixed.
Cleaning
instructions
In
order to
clean
the product,
use
a
mild detergent solution and
rinse
with
cold clean water.
Do
not
use
acetone, abrasive cleaners, or
other
special
detergents to
clean
the
panels.
Clean
the product once assembly
is
complete.
Before
starting
assembly
Choose
your
site
carefully before beginning
assembly.
The
ground
surface must be
perfectly flat
and leveled and
have
a
solid
base such
as
concrete, asphalt, deck
etc.
Sort the parts and check against
the content
parts
list.
Parts
should
be
laid
out
close at hand. Keep
all
small parts (screws etc.) in
a
bowl
so
they
do not get
lost.
Please
consult your
local
authorities if
any
permits
are
required prior to constructing the
product.
Having purchased
a
long patio
cover, make sure
you received
all boxes
according
to the additional page (Extending your patio cover) on the instruction manual.
As
soon
as
you
are
ready to assemble
your patio cover
(you can start
with this
box),
sort the parts and check against the content parts
list.
Prior
to enlarging the
Patio Cover, several parts need
to
be
dismantled, it
is
recommended to
keep
them
in
a
safe
place
for future
use.
Note:
Use
only the
parts registered
in
the content
list,
some parts may
be
surplus.
Tools &
Equipment
T001
(Supplied)
During Assembly
MWhen
encountering the information
icon, please refer
to the relevant
assembly step for additional comments and
assistance.
Note:
Anchoring this product to the ground
is
essential to
its
stability
and rigidity.
It
is
required to complete this
stage
in
order for your warranty to
be
valid.
Publicidad
