JVC KD-A725 Manual De Instrucciones página 27

Menu item
AMP GAIN *
8
SSM
SID * 9
AREA
MONO
BLEND HOLD Displayed only when the source is "FM" or "AM" and HD Radio tuner box, KT-HD300 is
IF BAND
USB *
10
IPOD SWITCH *
11
AUDIOBOOKS *
11
BLUETOOTH
AM *
12
EXT IN * 12
AUX IN * 12
BT AUDIO * 13
SOFT VER
* 8
The volume level automatically changes to "VOLUME 30" if you change to <LOW POWER> with the volume
level set higher than "VOLUME 30."
* 9
Displayed only when SIRIUS Satellite radio is connected.
* 10
Displayed only when "USB FRONT/ USB REAR" is selected as the source.
* 11
Displayed only when "IPOD-FRONT/ IPOD-REAR" is selected as the source.
* 12
Displayed only when any source other than "AM/ EXT IN/ AUX IN" is selected separately.
* 13
Displayed only when a USB Bluetooth Adapter is connected to the unit and when any source other than
"BT FRONT/ BT REAR" is selected.
Selectable setting, [ Initial: Underlined ]
LOW POWER : VOLUME 00 – VOLUME 30 (Selects if the maximum power
of each speaker is less than 50 W to prevent damaging the speakers.) /
HIGH POWER : VOLUME 00 – VOLUME 50
Displayed only when the source is "FM" or "HD Radio." For settings, see page 7.
Your SIRIUS identification number scrolls on the display 5 seconds after "SID" is selected,
see page 22. If no operation is done for about 60 seconds, the unit returns to playback
mode.
US : When using in North/Central/South America. AM/FM intervals are set to
10 kHz/200 kHz. / EU : When using in any other areas. AM/FM intervals are set to
9 kHz/50 kHz. / SA : When using in South American countries where FM interval is
50 kHz. AM interval is set to 10 kHz.
Displayed only when the source is "FM" or "HD Radio." For settings, see page 7.
connected. (page 20)
AUTO : Switches between digital and analog audio automatically / ANALOG : Tuning
to analog audio only. / DIGITAL : Tuning to digital audio only.
AUTO : Increases the tuner selectivity to reduce interference noises between adjacent
stations. (Stereo effect may be lost.) / WIDE : Subject to interference noises from adjacent
stations, but sound quality will not be degraded and the stereo effect will remain.
DRIVECHANGE : Selects to change the drive when a multiple drives device is
connected to the USB input terminal (front/rear).
HEAD MODE : Controls iPod playback through the unit. / IPOD MODE : Controls
iPod playback through the iPod/iPhone. / APP MODE : The sound of any functions
(musics, games, applications, etc.) running on the connected iPod/iPhone is emitted
through the speakers connected to this unit.
NORMAL / FASTER / SLOWER : You can select the playback speed of the
Audiobooks sound file in your iPod/iPhone.
• Initial selected item depends on your iPod/iPhone setting.
If the USB Bluetooth Adapter is not connected to the unit, "PLEASE CNNT BT ADAPTER"
scrolls on the display. For settings, see page 11.
ON / OFF : Enable or disable "AM" in source selection.
ON / OFF : Enable or disable "EXT IN" in source selection.
ON / OFF : Enable or disable "AUX IN" in source selection.
ON / OFF : Enable or disable "BT FRONT/ BT REAR" in source selection.
Shows the firmware version of the unit.
ENGLISH 27