Publicidad
Idiomas disponibles
Idiomas disponibles
▶The battery indicator flashes successively during charging and when
the 3 dots light up it indicates that it is complete.
▶After charging, disconnect the charging adapter from the vacuum
cleaner and unplug the power cord from the electrical outlet.
MOUNT CHARGING PORT
To keep the vacuum attached while charging, place it in the charging
port. To assemble it, follow the instructions below.
▶Use the 4 screws to place the support on the wall.
▶You can place the accessories on the lower part of the support.
CLEANING AND MAINTENANCE
BUCKET EMPTYING
To empty the bucket when the dirt reaches the "MAX" limit, you must
follow the instructions below.
▶Press the button at the bottom of the body to open the lid.
▶Press the following button to separate the dust container.
▶Separate the stainless steel filter from the dust container by turning
it clockwise.
Instruction manual
In the third point, stretch as indicated in the image to be able to make
a complete emptying.
FILTER CLEANING
To ensure your machine runs optimally, it's important to clean frequently
and check for clogs.
▶Remove the HEPA filter by pressing the buttons as seen in the
▶Due to the nature of the HEPA filter, the dense mesh of the wool can
▶That is why it is very important that once washed (preferably not
▶The filter is a consumable that can be replaced when you see the
CAUTION
When you wash the dust container you must take into account that the
parts marked with a circle should not get wet since they are in contact
with the power supply. If the vacuum cleaner is reassembled and these
parts are wet, it may cause product failure.
drawing.
block even the finest dust. But by washing it with water, the fabric
loosens little by little, which reduces its blocking function.
under the tap) let the elements dry naturally for at least 24 hours in
a shady place. Do not put it in the sun as it could deform, never put
it in a dryer.
suction function decrease.
ref. 07698
ES
PT
EN
FR
Publicidad
