Hayward RC34 Serie Manual Del Usuario página 30

8. To turn on the power supply, press the power button. While the indicator
lights are quickly pulsing select the desired cleaning cycle mode and
cleaning schedule.
a. Press the cycle button to select the desired cleaning cycle
mode (Quick Clean or Full Cycle mode).
i. The Quick Clean cleaning cycle duration is 1.5 hours
ii. The Full Cycle cleaning cycle duration is 3.0 hours
b. Press the schedule button to select the desired schedule mode.
i. 1X = Single Cleaning Cycle. The cleaning cycle does not repeat
ii. 24h = Daily Cleaning. The robotic cleaner will turn on once
every 24 hours to perform the selected cleaning cycle. There
is a limit of 7 consecutive cleaning cycles in this mode.
iii. 48h = Every other day Cleaning. The robotic cleaner will
turn on once every 48 hours to perform the selected
cleaning cycle. There is a limit of 4 consecutive cleaning
cycles in this mode.
iv. 72h = Every third day Cleaning. The robotic cleaner will
turn on once every 72 hours to perform the selected
cleaning cycle.
v. NOTE: This schedule must be reset / selected WEEKLY.
This is to prevent damage to the cleaner if left unattended.
9. The robotic cleaner will automatically start the selected cleaning cycle when no buttons on the power supply have been
pressed for 10 seconds. The power indicators, selected cleaning cycle mode indicators, and selected cleaning schedule
indicator will light up continuously during the cleaning cycle.
Note: A cleaning cycle and schedule can be stopped by pressing the power button.
10. When the robotic cleaner has completed the cleaning cycle,
the power supply will do one of the following:
a. Enter standby mode. This happens if there are no more cleaning cycles
remaining in the schedule.
b. Enter schedule standby mode. This means that the power supply is in
between cleanings for the indicated schedule. The power indicators,
selected cleaning cycle and cleaning schedule indicators will slowly pulse.
The robotic cleaner will automatically turn on and start the selected cleaning
cycle per the selected schedule.
HAYWARD only warranties the quality, performance and safety of its products when assembled with genuine
Hayward manufactured parts. Use of non-genuine Hayward manufactured parts will void all warranty.
Page 9 of 20 Rev. C