Intended Use
This fixture is suitable for Indoor Use.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
DO NOT let children come into contact with the fixture.
Supervision is required when inexperienced operators use
this fixture.
Specifications
Model
Power
Brightness
Color Temperature
Color Rendering Index
Input Voltage
Location Rating
Power Cord
Dimensions
UNPACKING
WARNING: It is unlikely the product is faulty or has
a missing component. If you find product is faulty,
do not operate the product until the parts have been
replaced or the fault has been rectified. Failure to do so
could result in serious personal injury.
Remove fixture from carton and discard all packaging.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn unit off, disconnect it from power
source and before making any adjustments or
removing/installing attachments or accessories.
MOUNTING INSTRUCTIONS
CAUTION: Risk of electric shock. Do not use in or
near standing water or where water may accumulate.
Keep this fixture at least 16ft away from pools or spas.
Keep plug dry. Use only with a grounded outlet. See
"Grounding Instructions" on page 4.
Magnets (Fig. A, B)
WARNING: RISK OF FALLING. If this fixture is
not properly secured, it can fall and can cause
damage to the unit, surrounding property, and
could result in serious injury or death to the
user or other living objects. Magnets are only
attracted to certain metals. Metals that have
iron (FERROUS) in them - like steel - attract
magnets well. Metals like brass, copper, zinc and
aluminum ARE NOT magnetic. Non-magnetic
materials such as wood and glass are also NOT
attracted to magnets. Always ensure the light
is attached to a FERROUS surface before using
MAGNETS
7
for mounting.
CMXELAYMXL2089
9 Watts
600 Lumens
4000K
90
AC 120V 60Hz
Damp Locations
5 ft
18 in x 3.5 in x 1.6 in (457mm x
90mm x 41mm)
This under-cabinet light includes four built-in magnetic
discs
7
, which can be attached to ferrous surfaces.
WARNING: Magnets are not toys. If magnet(s)
separate from light fixture, discontinue use and refer
to Authorized Service Center for repair. Keep magnets
out of reach of children. If swallowed, get immediate
medical attention.
WARNING: Always attach the fixture onto an even
ferrous surface and ensure that all four magnetic discs
make full contact with the surface.
CAUTION: For use on ferrous cabinets constructed of
18 gauge or thicker steel.
Fig B.
7
Mounting Bracket to Wood (Fig. A, C, D, E)
The fixture can be mounted with bracket
screws
if the cabinet is wood.
12
While holding bracket
11
locations shown in Fig. C. Using a 1/16-in drill bit (not
included), pre-drill the four holes, then secure the
bracket
11
on the under cabinet surface tightly by wood
screws
12
, using Philips screwdriver (not included) as
shown in Fig.C.
CAUTION: the thickness of cabinet wooden board
should be no less than 0.86in to ensure that the screws
are not exposed inside the cabinet. Particle board is
not recommended.
Fig C.
12
Align the bracket groove
4
bracket
11
and press light into bracket until it snaps into
place as shown in Fig. D and Fig. E.
English
11
and wood
in place, mark the four screw
11
in the light fixture with the
3