Impeller Replacement
(Fig. 20)
If a loss of performance
is detected while operating
blower, unplug unit, remove inlet cover, and check
impeller blades for wear. If blades are severely
worn,
see your Authorized
TORO Service Dealer for a new
impeller.
Servicing Double-insulated
Appliance
In a double-insulated
appliance,
two systems
of
insulation
are provided
instead of grounding.
No
grounding
means is provided
on a double-insulated
appliance,
nor should a means for grounding
be added
to the appliance.
Servicing
a double-insulated
appliance
requires extreme care and knowledge
of the
system, and should be done only by qualified
service
personnel.
Replacement
parts for a double-insulated
appliance
must be identical
to the parts they replace.
A double-insulated
appliance
is marked with the
words "DOUBLE
INSULATION"
or "DOUBLE
INSULATED."
The symbol (square within a square)
[] may also be marked on the appliance.
Toro Service
Support
If your unit requires service or maintenance,
your
nearest TORO Master Service Dealer is the best
dealer to assist you. Refer to the "Yellow Pages" of
your local telephone
directory
in the section titled
"Lawn Mowers."
TORO Master Service Dealers
are
listed under the TORO trademark.
If you need help
locating a TORO Master Service Dealer near you, call
1-800-421-9684
for assistance.
Troubleshooting
PROBLEM
Unit won't run or stops running
Unit seems to be low on power
Vacuum tube will not stay
securely fastened to housing
POSSIBLE CAUSE
1.
Unit not plugged in
2.
On/off switch in "off" position
3.
Inlet cover or vacuum tube
incorrectly installed or removed
4.
Blown fuse or tripped circuit breaker
5.
Faulty extension cord
1.
Blower is set to low speed setting
2.
Impeller is worn
1.
Mounting tabs on tube are not fully
secured in housing
CORRECTIVE ACTION
1.
Plug in unit
2.
Turn to "on"
3.
Secure cover or vacuum
tube
4.
Replace fuse or reset
breaker
5.
Replace cord
1,
Set to high speed
setting
2.
Replace impeller
1.
Reposition vacuum tube
to proper position
EN-8
UPL 67538