Descargar Imprimir esta página

SHERCO 450 SEF RACING Manual Del Usuario página 135

Publicidad

Idiomas disponibles

Idiomas disponibles

ELECTRICAL SYSTEM MAINTENANCE
REPLACING THE MAIN FUSE
REPLACING THE FUSE FOR THE LIGHTS
REMOVING THE HEADLIGHT HOUSING
1
2
Remove the seat ( p.116).
The main fuse
Remove the defective fuse and replace with a new fuse
of the same value.
Main fuse 30A
Put a new spare fuse in the reserve location in the
fuse box.
1
- Replace the seat ( p.116).
Remove the seat ( p.116).
The light fuse
wiring harness on the right side of the bike.
Remove the defective fuse and replace with a new fuse
of the same value.
Light fuse
- Replace the seat ( p.116).
1
Unclip the left and right rubber fastners
side of the fork.
Separate all of the brake hoses / cables from the meter
bracket at the top and bottom.
Move the top plate up to clear the housing.
Disconnect the connector
headlight housing.
is on a relay by the starter.
1
is located in a high location on the
1
and remove the
2
30A
15A
on each
1
135

Publicidad

loading

Este manual también es adecuado para:

500 sef racing450 sef factory500 sef factory