KATEK ghost ONE Basic Guia De Inicio Rapido página 14

6. Give the RFID chip a name of your choice in the
web app / mobile app.
7. Select Add to approved list.
The RFID chip is added to the approved list and is
displayed as a registered chip in the Approved
list screen.
Charging a vehicle with an RFID
chip
Prerequisite
Charge level LED (2) is lit up white (no vehicle iden-
tified yet).
1. For ghost ONE ERK version only: Connect the
vehicle cable to the socket on the wallbox.
2. Connect the vehicle cable to the vehicle.
The charge level LED (2) pulses white (vehicle
l
identification in progress).
The charge level LED (2) pulses yellow (wait-
l
ing for authentication).
10
3. Hold up the RFID chip to the RFID sensor (6) on
the front panel of the wallbox and wait for iden-
tification:
A beep sounds and the RFID LED (6) lights up
l
green briefly as soon as the RFID chip has
been successfully identified.
When the charge level LED (2) is pulsing
l
green, the charging process has been started
successfully.
When charging is complete or the vehicle is
l
fully charged, the charge level LED (2) is con-
tinuously lit in green.
Further information
The wallbox provides the following additional authen-
tication methods, see operating instructions:
Plug & charge (planned as future application)
l
Auto charge
l
Approval by remote control
l
Approval in the web app
l
When using OCPP, the network provider's server
issues the charging approval remotely.