Kenmore 78073 Manual Del Propietário página 6

HOW TO INSTALL
O Remove the screws which fasten the cabinet at
both sides and at the back.
B Slide the unit out of the cabinet by gripping the
O Screw the upper guide _ to the top of the
cabinet as shown in FIG. 7 using (3) TYPE A
screws _. Insert the side curtain (_ into the upper
guide _ and lower guide of the air conditioner.
Fasten the curtains to the unit with (8) TYPE A
Jicrews
(TYPE AI
FIG. 3
FIG. 7
base pan handle and pull forward while bracing the
cabinet.
FIG. 4
Iklcut the FOAM-PE _) to fit the underside of the
window sash. Peel off the backing and attach the
seal as shown in Fig. 5.
r_open the window. Mark a line on center of the
window stool (or desired air conditioner location),
Carefully place the cabinet on the window stool and
align the center mark on the angle front with the
center line marked in the window stool,
Window stool
Front angle
FIG. 8
I_1 Pull the bottom window sash down behind the
upper guide until it meets.
FIG. 5
D Remove the backing from the FOAM-PE O and
attach to the bottom of the upper guide (_.
NOTE: Do not pull the window sash down so tightly
that the movement of side curtain is restricted.
WINDOW SASH UPPER GUIDE_)
CABINET
SIDE CURTAIN
FIG. 9
D Loosely assemble the sill supports using the
parts in FIG. 10.
FIG. 6
_ Nut(_)
Ben@ FIG. 10
-6-