ADJ ACCU-STAND EVENT FACADE 2 Guía De Usuario página 7

I N S TA L L AT I O N
1. Connect top and bottom metal frame sections together by inserting the bottom section securely
into the top section, making sure the hook-and-loop strips of both sections are oriented in the
same direction. Also make sure that there are no gaps between the two sections. (see images
below left and center). Note: Bottom metal frame section has 2 rubber feet.
2. Secure the top and bottom frame sections together by attaching the fabric/scrim color panels to
the hook-and-loop strips, starting at the top section and working down towards the bottom section,
stretching the fabric/scrim slightly as needed, as shown in the above right image.
3. Repeat steps 1 and 2 for the remaining metal frame sets.
4. Connect the completed facade panels together by aligning the top and bottom hinges and insert-
ing both rotation pins into the hinge sleeves, as illustrated below.
7