Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Hammer action selector(See fig.5)
a. To select hammer action for drilling in
masonry, set the hammer action
selector fully to the right marked with
symbol "
b. To select drill mode for drilling in wood
and metal, set the hammer action
selector fully to the left marked with
symbol "
MAINTENANCE
Never use aggressive detergents or
solvents for cleaning.
a. To prevent accidents, always unplug
the tool from the power source before
cleaning or performing any maintenance
the saw may be cleaned most effectively
using compressed air. Always wear
safety goggles when using compressed
air. If compressed air is not available,
use a brush to remove dust and chips
from the tool.
b. Motor ventilation vents and switch
levers must be kept clean and free of
foreign matter. Do not attempt to
clean by inserting pointed objects
through openings.
c. Never use any caustic agents to clean
plastic parts. Such as: gasoline, carbon
tetrachloride, chlorinated cleaning
solvents, ammonia and household
cleaners containing ammonia. Do not
use any of these to clean the tool.
TRANSPORT
Turn the motor off and disconnect the mains plug. While transporting, be careful not to
drop, or shock the machine. For transport, the machine has to be fixed against slipping
and tipping over. Do not place objects on the machine.
MEANING OF CROSSED -OUT WHEELED DUSTBIN
Do not dispose of electrical appliances as unsorted municipal waste, use separate
collection facilities. Contact your local government for information regarding the collection
systems available. If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain,damaging your
health and well-being.
AFTER-SALES SERVICE HOT-MAIL
For questions about this or any other KNOVA Products, or Login our web site:
www.knova.com.mex.
" .
" .
d. Have an authorized service center
examine and/or replace the worn
carbon brushes in the event of
excessive parking.
e. Keep the machine clean all the time.
f. lf you discover any damage, consult
the exploded drawing and parts list to
determine exactly which replacement
part you need to order from our
customer service department.
g. Clean the housing only with a damp
cloth. Do not use any solvents! Dry
thoroughly afterwards.
h. lf the supply cord of this power tool is
damaged, it must be replaced by a
similar cord available through the
service organization or a qualified
authoritative technician.
: Do not use cleaning
CAUTION
agents to clean the plastic parts of
the tool. A mild detergent on a damp
cloth is recommended. Water must
never come into contact with the tool.
Fig. 5
Publicidad
