Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE about
LP Gas Tank Exchange
Programs
• Many retailers that sell grills offer you the option of replac-
ing your empty LP Gas tank through an exchange service.
Use onIythose reputable exchange companies that inspect,
precision fill, test and certify their tanks. Exchange your
tank only for an OPD safety feature-equipped
tank as de-
scribed in the LP Gas tank section of this guide.
• Always keep new and exchanged LP Gas tanks in an up-
right position during use, transit or storage.
• Leak test new and exchanged LP Gas tanks BEFORE
connecting one to your griddle.
How to Leak Test your LP Gas Tank
For your safety:
• All leak tests must be repeated each time your LP Gas
tank is exchanged or refilled.
• When checking for gas leaks do not smoke.
• Do not use an open flame to check for gas leaks.
• Your griddle must be leak tested
outdoors
in a well-venti-
lated area, away from ignition
sources
such as gas fired
or electrical
appliances.
During
the leak test, keep your
griddle away from open flames
or sparks.
• Do not use household
cleaning
agents.
Damage
to gas
assembly
components
can result.
[]
Use a clean paintbrush and a 50/50 mild soap and
water solution.
[]
Brush soapy solution onto LP Gas tank in the areas
indicated by the arrows. See diagram.
[]
If growing bubbles appear do not use or move the LP
Gas tank. Call an LP Gas Supplier or your Fire De-
partment.
J
If growing
bubbles appear do not use or move
the LP Gas tank. Contact
an LP Gas Supplier or
your fire department!
LP Gas Model only:
Secure a 201b LP Gas Tank to Gas Griddle
[]
Turn your LP Gas Tank Valve clockwise to the closed
or OFF positon.
[]
Open the door and unscrew the Wing Bolt from right
bracket of tank holder.
[]
Place LP Gas tank into tank holder. Be sure bottom
of tank fully rests in cutout in bottom shelf.
[]
Install the tank so the Tank Valve faces the rear right
corner of cabinet.
[]
Align and screw the Wing Bolt into right bracket of
tank holder to secure the gas tank.
[]
Attach the Regulator with Hose to the gas tank.
One Nut is fixed to
Tank Holder. An
additional Nut and
Wing Bolt is secured
AFTER inserting tank
into tank hole.
Tank
Holder
Additional
Nut
/
/'
/
\
\
Tank tray
Wing
Bolt 1!4"xl/2"
Qty. 1
Part # S233G04084
(Already
installed on the Tank
Holder.)
10
Publicidad
