Mitsubishi Electric Mr.Slim SEZ-KC25 Manual De Instrucciones página 9

2. Operation
4
TIMER
AFTER
˚C
6
AFTER
˚C
6
TIME SUN
˚C
˚C
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
OPERATION
PAR-21MAA CLOCK
˚C
˚C
˚C
5
Timer Setting
OFF
1
AUTO OFF
7
˚C
AUTO OFF
7
AUTO OFF
7
OFF
˚C
AUTO OFF
1
Lock Indicator
FUNCTION
ON/OFF
1
FILTER
4
CHECK TEST
CLEAR
1
FUNCTION
˚C
1
FUNCTION
˚C
1
˚C
5. Press the Mode (Return) button 2 to complete the setting procedure
and return to the standard control screen.
6. If the air conditioner is already running, the timer starts countdown
immediately. Be sure to check that the timer setting appears cor-
rectly on the display.
s s s s s Checking the Current Auto Off Timer Setting
1. Be sure that the "Auto Off" is visible on the screen (at 1).
2. Hold down the Timer Menu button B for 3 seconds, so that "Moni-
tor" is indicated on the screen (at 4).
• The timer remaining to shutdown appears at 5.
3. To close the monitor and return to the standard control screen, press
the Mode (Return) button 2.
s s s s s To Turn Off the Auto Off Timer...
G Hold down the Timer On/Off button 9 for 3 seconds, so that "Timer Off"
appears (at 6) and the timer value (at 7) disappears.
G Alternatively, turn off the air conditioner itself. The timer value (at 7) will
disappear from the screen.
s s s s s To Turn On the Auto Off Timer...
G Hold down the Timer On/Off button 9 for 3 seconds. The "Timer Off "
indication disappears (at 6), and the timer setting comes on the display
(at 7).
G Alternatively, turn on the air conditioner. The timer value will appear at
7.
2.8. Locking the remote controller buttons (Operation
function limit controller )
I If you wish, you can lock the remote controller buttons. You can use the
Function Selection of remote controller to select which type of lock to
use. (For information about selecting the lock type, see section 2.10. [4]-
2. (1)).
Specifically, you can use either of the following two lock types.
1 Lock All Buttons:
Locks all of the buttons on the remote controller.
2 Lock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
Note:
The "Locked" indicator appears on the screen to indicate that buttons are cur-
rently locked.
s s s s s How to Lock the Buttons
1. While holding down the Filter button 4, press and hold down the
ON/OFF button 1 for 2 seconds. The "Locked" indication appears on
the screen (at 1), indicating that the lock is now engaged.
* If locking has been disabled in Function Selection of remote con-
troller, the screen will display the "Not Available" message when
you press the buttons as described above.
If you press a locked button, the "Locked" indication (at 1) will blink
•
on the display.
s s s s s How to Unlock the Buttons
1. While holding down the Filter button 4, press and hold down the
ON/OFF button 1 for 2 seconds—so that the "Locked" indication
disappears from the screen (at 1).
9