Installation Diagram - StetSom Evolution Serie Manual De Usuario

INSTALLATION
21
• The installati on must be done by qualifi ed and experienced professionals;
• Choose where the control module will be placed. Use a multi meter to check the
vehicle's signals;
• Connect the signal and power wires according to installati on informati on and
availability of functi ons in the vehicle;
• Before connecti ng the control module to the electrical harness make sure there
are no "short".
• Do not forget to plug the module central aft er the installati on is complete.
The perfect working of this product depends on the technical characteristi cs of the vehicle.
Some functi ons or features may not apply. Actuators, modules and external relays may be
required, not included in the alarm kit.
If you have any questi ons, please contact the dealer or the shop where installati on
was performed, or please contact our SAC: 3003 1900. Go to www.stetsom.com.br/
en/instaladores to fi nd specifi c installati on materials in diff erent vehicles.
22

INSTALLATION DIAGRAM

DOOR IGNITION OUTPUT WINDOW
(green) (blue) (green/black)
ULTRASOUND
(Passenger)
ULTRASOUND
(Driver)
HOOD (brown)
PLAYER/RADIO
(purple)
STETSOM
AUXILIARY (gray)
22
SIREN MASTER BUTTON
(black/yellow) (black)
Ground
+12V (red)
Ground
RIGHT BLINKER
(black/green)
LEFT BLINKER
LOCK
(red/yellow)
UNLOCK
(red/black)
Only program the automati c closing of the windows when the window
regulator has an anti -pinch device in accordance with annex S5 of the
regulati on §571.118 Standard No. 118.
RELAY INSTALLATION DIAGRAM
23
If there is a need to install equipment with current consumpti on higher than that
indicated for each output (auxiliary, sound, lock, unlock, expansion) relays are
required.
Turn NEGATIVE alarm signal
(200mA) into POSITIVE
+12V.
+12V
Negati ve
Signal
(Alarm)
+12V
Output
Connecti on for Lock
(Corrent to 10A)
STARTING
SWITCH
(yellow wire)
ALARM
MODULE
(block)
START
ENGINE
(yellow wire)
The igniti on coil and fuel pump lockout opti ons are not recommended by STETSOM
as they may compromise, in whole or in part, the operati onal performance and
safety of the vehicle.
Turn NEGATIVE alarm signal
(200mA) into NEGATIVE of
higher power.
Ground +12V
(Negati ve)
Negati ve
Signal
(Alarm)
Negati ve
Output
Connecti on for Lock
(Corrent greater to 10A)
(Auxiliary relay sold separately)
ALARM
SYSTEM TO BE
MODULE
LOCKED
(block)
+12V
(yellow wire)
SYSTEM TO BE
LOCKED
23