Black and Decker 11BDE-315 Manual De Instrucciones página 10

Leaks caused by loose fittings or
worn or damaged hoses can result
in injection injuries. DO NOT TREAT
FLUID INJECTION AS A SIMPLE
CUT! See a physician immediately!
PRESSURE WASHER
OPERATING FEATURES
CLICk-N-CLEAN
(Fig. 4)
WARNING: Do not move the nozzle
to adjust spray while the trigger is
squeezed.
The Click-N-Clean
four spray settings. Turn the collar 90°
to the desired position.
S.
T. The High Pressure jet
Stream
intended for cleaning
with high pressure.
U. The High Pressure
Wide
position is intended for
clea ning
pressure.
V.
NOTE: The pressure of the spray on
the surface you are cleaning increases
as you move the wand closer to the
surface.
S
4
T
V
SPRAY LANCE
®
4 n 1 nozzle has
®
The Low Pressure
Soap
position
intended for dispen-
sing detergent.
position
Fan Spray
with
The High Pressure
Turbo Spray position
is intended for optimal
cleaning.
U
NOTE: The pressure of the spray on
the surface you are cleaning increases
as you move the wand closer to the
surface.
CAUTION: The High Pressure
jet Stream spray position is very
aggressive. We recommend that for
most cleaning applications a fan spray
pattern (U or V) be used to avoid
damage to the surface being sprayed.
POWERSWIVEL
(FIG. 5)
CAUTION: The red nozzle portion of
the lance pivots 360°. This adjustment
can only be made when the gun trigger
is completely released. Do not attempt
to adjust the nozzle when the machine
is in operation. Failure to follow this
is
instruction could result in personal
injury.
The nozzle pivots 360° and delivers a
high pressure fan spray pattern to clean
is
hard to reach areas.
5
high
USING DETERGENT (FIG. 6–7)
NOTICE: Use only approved pressure
washer cleaners. Do not use bleach,
chlorine, or any cleaners containing
acids.
NOTICE : Fill and flush the detergent
tank with clear water after use.
1. Insert the spray lance (B) into the
gun (A) by pushing firmly and
simultaneously twisting a 1/4 of a
turn counterclockwise until locked
into place.
10- ENG
FAN SPRAY WAND
®
R