MedNet Tempdrop Manual Del Usuario página 7

Setting up your Tempdrop sensor
Step 1 Prepare for wearing
-Insert the Tempdrop sensor into the
fabric armband pocket with the pink
button facing against the mesh fabric.
Metal disc is visible in the centre of the
pocket opening.
Step 2 Adjust the armband size
- Hook the band to your approximate
size. If a larger size is needed, attach
extender(s).
Step 3 Position the Tempdrop sensor
- On the upper inner arm, locate the
"soft dip" between the muscles just
below the armpit hairline.
- Gently "walk" the armband up your
arm towards the armpit, metal disc side
against the skin.
- Position the sensor over the soft dip
with the tip pointing towards the elbow.
EN