MedNet Tempdrop Manual Del Usuario página 9

Using your Tempdrop sensor
Turn on the sensor each night before placing
it on the arm. Gently press the pink button for
2-3 seconds. The green light flashes slowly
for 30 seconds.
Warning Do not use nails when pressing the
1
button as this can cause damage.
While the light is still
flashing, put Tempdrop
on your arm in the
correct position.
2
Go to sleep,
leaving it on all night even if your
sleep is temporarily interrupted.
Tempdrop needs to be worn for at
least 3 hours, with a minimum of 2
hours of detected sleep to receive a
valid result. Sleep time does not
have to be consecutive.
EN
3