makro PROFESSIONAL METRO PROFESSIONAL GSC2350 Manual De Instrucciones página 7

4. Troubleshooting
WARNING!
• In case of failures or malfunctions, always
unplug the appliance immediately.
• Only perform the steps described in this
instruction manual! All further inspection,
maintenance and repair work must be
performed by an authorized service center or a
similarly qualified specialist.
• Should you require spare parts, always obtain
them from an authorized seller. Do not use
spare parts that are not recommended by the
manufacturer!
Possible
Problem
cause
Power plug
not connected
to electrical
outlet.
Appliance
does not
operate.
Supply cord is
damaged.
Thermostat
is not set
correctly.
Appliance is
located near
heat sources.
Stored
beverages or
other objects
Appliance prevent
does not proper closing
achieve of door.
required
Cooling
temperature.
compartment
overloaded,
filled with hot
beverages or
filled in a way
that prevents
proper air
circulation.
Door opened
and closed
too often.
Solution
Connect power
plug to a suitable
electrical outlet.
Plug it in tightly.
Have supply cord
replaced by the
manufacturer, its
service agent or
similarly qualified
persons.
Set temperature
with thermostat as
described in this
manual.
Move appliance
well away from heat
sources.
Reorder contents
of cooling
compartment or
remove several
items to allow door
to close.
Remove several
items, remove
hot beverages or
reorder contents
of cooling
compartment to
allow air circulation.
Keep door closed
for a while.
- 7 -
Possible
Problem
cause
Back of
appliance is
placed too
near to the
wall or to
other objects.
Appliance is
very noisy.
Appliance not
in a stable
position.
Normal
Condensation phenomenon
on outside of in hot and
appliance. humid
environments.
5. Product fiche
Trademark
Model identifier
Type of model
Energy Consumption
over 24 hours
Net Volume (V )
N
Climate Class
Refrigerant/Charge
MCC Trading International GmbH
Schlüterstraße 5
40235 Düsseldorf
Germany
For the circuit diagram, please see illustration at the
end of this manual.
a. Switch
b. LED power
c. LED lamp
d. Thermostat
e. Evaporator fan motor
f. Overload protector
g. Compressor
Solution
Keep a minimum
distance of >10cm
to wall or other
objects.
Bring appliance into
a stable position by
adjusting the legs.
Make sure that all
legs are firmly on
the ground.
Wipe appliance with
a dry and soft cloth.
GSC2350 / GSC2350B
/ GSC2350B-BS
/ GSC2350-BS /
GSC2350-WS
Vertical Chilled
(Heavy duty)
1.84 kWh/24h
324 L
4
R600a/0.08kg
GB