Craftsman professional 172.27675 Manual Del Operador página 13

Z_ WARNING:
Your sander should NEVER be ('onnected to the power source
when you are assembling parts, making adjustments, installing or removing
sandpaper, cleaning or when it is not in use. Disconnecting the sander will prevent
accidental starting, that could cause serious personal injury.
INSTALLING THE SANDPAPER (See Figs. 3)
ALWAYS inspect the sandpaper before installing. DO NOT use if broken or defective.
1. Unplug the sander.
Z_ WARNING:
Failure to unplug the sander could result in accidental
starting causing possible serious personal injury.
NOTE: Remove dust bag assembly when installing sandpaper. ALWAYS remember I
to reattach the dust bag assembly before beginning sanding operation
I
(see page 15, Fig. 6).
2. Align the holes in the sanding disc with the holes in the hook and loop backing pad.
NOTE: Holes in sanding disc must line up with holes in the backing pad in order for
the dust collection feature of the sander to function properly.
3. Press the sanding disc against the backing pad as firmly as possible.
I OTE: For best adhesion, we recommend that you clean the backing pad and the
sanding disc backing occasionally by brushing them lightly with a small brush.
Fig 3
Backing Pad
Hook and Loop Sanding
Disc with Pre-Punched Holes
13
27675
2/11/08