Publicidad
Idiomas disponibles
Idiomas disponibles
ATTACHING VAC HOSE TO THE DUST COLLECTION
SYSTEM cont.
NOTE: A standard 1l/d-in, vac hose connection fits; inside the smaller diameter
hole inside the dust exhaust, while a standard 21/2-in. vac hose connection
fits inside the larger hole of the dust exhaust.
/ik WARNING:
When sander is not connected to vacuum, always install
dust bag back on sander. Failure to do so could cause sanding dust or foreign
objects to be thrown into the face or eyes which could result in possible
serious injury.
/{k WARNING:
Collected sanding dust from sanding surface coatings
(polyurethane, linseed oil, etc.) can self-ignite in sandier dust bag or elsewhere
and cause fire. To reduce risk, empty dust bag frequeritly and strictly follow
sander manual and coating manufacturer's instructions.
/{k WARNING:
When working on metal surfaces, r)o NOT use the dust bag
or a vacuum cleaner because sparks are generated. Wear safety glasses and a
dust mask. Due to the danger of fire, do not use your sander to sand magnesium
surfaces. Do not use for wet sanding.
Before attempting to use any tool, be sure to familiarize yourself with all the
operating features and safety instructions.
/_ WARNING-
IF ANY PARTS ARE MISSING, DO NOT OPERATE YOUR
SANDER UNTIL THE MISSING PARTS ARE REPLACED. FAILURE TO FOLLOW
THIS RULE COULD RESULT IN SERIOUS PERSONAL INJURY.
i i_k WARNING:
DO NOT let familiarity with your sander make you careless.
I
Remember that a careless fraction of a second is sufficient to cause severe injury.
ON/OFF
ROCKER
SWITCH
(see Fig. 6)
This switch is sealed to help keep out dust
for a longer life and is conveniently
located
near the front of the palm grip handle.
Start the sander by pushing in the part of the
switch with theE],
Let the motor build to its
maximum
speed before starting
sanding
operation.
To turn sander
off, push side of
switch with the [].
16
Publicidad
