Publicidad
Idiomas disponibles
Idiomas disponibles
Engraving point
5
Engraving point holder
6
Engraving stencils
7
Included items
1 Power engraving tool PGG 15 B1
2 Engraving stencils
1 Operating instructions
Technical details
Rated voltage:
Mode of operation:
Note: A duty cycle (in %) defines explicitly the maximum continuous
duration of use and the subsequent rest period. In this case the tool
requires a cooling phase of eight minutes after an operating period of
two minutes, for example.
Rated current:
Stroke rate:
Noise and vibration data:
Measured values for noise are determined in accordance with
EN 60745. The A-weighted noise level of the electrical power tool
are typically:
Sound pressure level: 74.4 dB(A)
Sound power level:
Uncertainty K:
230 V∼ 50 Hz
intermittent operation: S3 20 %
0.15 A
6000 min
-1
85.4 dB(A)
3 dB
Introduction
GB/MT
55
Publicidad
