Publicidad
3.
General Guidelines
Refer to the Velleman Group NV® Service and Quality Warranty
on the last pages of this manual.
•
Familiarise yourself with the functions of the device before
actually using it.
•
All modifications of the device are forbidden.
•
Only use the device for its intended purpose. Using the device
in an unauthorised way will void the warranty.
4.
Features and specifications
• PIR motion sensor for recessed and surface mounting. Thanks to
its compact design, this sensor can be discreetly mounted in
ceilings, walls, cabinets or dressers. You have the choice of
building this sensor in by simply drilling a 13mm hole or installing
it as surface-mount with the included bracket.
• suitable for: 12 and 24V LED strips
5.
Installation
Determine the Mounting Location:
Determine where to place the PIR motion sensor. Choose a location
for the motion sensor where the chance of unintended movement is
minimal. The detection angle is 110° and the detection distance is 1
to 3 meters.
When the human body moves within the detection range, the PIR
motion sensor turns on the light. When the human body leaves the
detection range after a 45-second delay, the PIR motion sensor turns
the light off.
Important!:
Connect the motion sensor to the LED driver and LED strip and test
the operation in a test setup. If the result is good, you can start the
effective assembly.
1.
Recessed mount:
Use the drill to drill a hole at the marked location. Make sure the hole
is large enough (13mm) to safely mount the sensor.
V. 01 – 15/11/2023
LQS04
6
©Velleman Group nv
Publicidad
