Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
2.
Fill the milk jug and make sure it is above the MIN mark and does not exceed the MAX
mark.
3.
Place the jug on the heating base.
Close the jug with the lid and make sure that the end of the accessory for milk fits properly
4.
into the lid. Press the lid lightly to ensure it is fully closed.
5.
Press the
button until the red light comes on.
6.
The appliance will switch off automatically after 4 minutes but can also be switched off
manually at any time by pressing
.
Note:
it is possible for the motor fan to continue running after the process has finished.
Frothing cold milk
Note:
use the accessory for milk for this function.
1.
Insert the accessory for milk vertically into the jug. The base includes a magnet that will
hold the accessory in place.
2.
Fill the milk jug and make sure it is above the MIN mark and does not exceed the MAX
mark.
3.
Place the jug on the heating base.
4.
Close the jug with the lid and make sure that the end of the accessory for milk fits properly
into the lid. Press the lid lightly to ensure it is fully closed.
Press the
button until the blue light comes on.
5.
6.
The appliance will switch off automatically after 3 minutes but can also be switched off
manually at any time by pressing
.
Note:
it is possible for the motor fan to continue running after the process has finished.
Heating up milk
Note:
use the accessory for milk for this function.
1.
Insert the accessory for milk without the stainless-steel spring into the jug. The base
includes a magnet that will hold the accessory in place.
2.
Fill the milk jug and make sure it is above the MIN mark and does not exceed the MAX
mark.
3.
Place the jug on the heating base.
Close the jug with the lid and make sure that the end of the accessory for milk fits properly
4.
into the lid. Press the lid lightly to ensure it is fully closed.
5.
Press the
button until the red light comes on.
6.
The appliance will switch off automatically after 5 minutes but can also be switched off
manually at any time by pressing
.
Note:
it is possible for the fan to continue running after the process has finished.
Making hot chocolate
Note:
use the accessories for chocolate.
1.
Insert the accessory for milk vertically into the jug. The base includes a magnet that will
hold the accessory in place.
32
POWER MOCA SPUME 5000
2.
Fill the milk jug and make sure it is above the MIN mark and does not exceed the MAX
mark.
3.
Add chopped chocolate to the milk. It is recommended to cut small pieces for an optimal
result. Ground or powdered chocolate can also be used.
4.
Close the jug with the lid and make sure that the end of the accessory for milk fits properly
into the lid. Press the lid lightly to ensure it is fully closed.
5.
Press the
button until the purple light comes on.
The appliance will switch off automatically after 6.5 minutes but can also be switched off
6.
manually at any time by pressing
.
Note: it is possible for the fan to continue running after the process has finished.
Attachments
-
Accessory for frothing hot and cold milk. Fig. 3
-
Accessories for hot chocolate (with spring). Fig. 4
4. CLEANING AND MAINTENANCE
-
Switch off the milk frother, unplug it, and allow it to cool down before cleaning or storing it.
-
Remove the sealing ring from the lid for better cleaning.
-
Remove all accessories from inside the jug and clean them separately.
-
Do not use abrasive sponges, powders, or cleaning agents to clean the appliance and its
accessories.
-
Clean the milk frother and the attachments after each use.
Lid
Sealing ring
Accessories for milk and
chocolate
Jug
Heating base
ENGLISH
POWER MOCA SPUME 5000
33
Publicidad
