cecotec PROCLEAN 5010 INOX Manual De Instrucciones página 48

ENGLISH
4. Defrost button
5. Timer button
6. Settings button
7. Start button
8. Pause/Cancel button
9. Time/weight knob
Before cooking
1. Connect the appliance to a power outlet. Once it is connected, the LED light will flash 3
times and will show colon (:).
2. Enter the cooking function and the cooking time.
3. Time/weight knob Cooking time and food weight can be increased or decreased during
operation by turning the Time/Weight knob. According to the operating mode, select time
or weight.
Pause/Cancel
- Before operation: Press once in order to reset settings and return to to initial stage.
- During operation: Press once in order to interrupt operation or press twice in order to
cancel pre-set cooking program.
Reminder
Once the pre-set cooking process is over, it will say END on the LED display panel and the
microwave will beep 3 times. Press Pause/Cancel button or open the microwave door in order
to stop the alarm, if not, the alarm will sound every 3 minutes.
Clock/timer setting
Press the Timer button and then turn the knob clockwise or anticlockwise to set the hour. When
the correct time is displayed, press the timer button again and turn the knob to set the minutes.
Once the correct minutes are displayed, wait 5 seconds or press the timer button to confirm.
Example: Setting clock at 12:30
Steps
1 After powering up, the display panel shows the colon sign.
2 Press the Timer button once.
3 Turn the knob to set the exact hour.
4 Press the Timer button once.
5 Turn the knob to set the exact number of minutes.
6 Press the Timer button once to confirm the set time or wait for 5 seconds for
the microwave to set it automatically.
48 PROCLEAN 5010 INOX / 5020 MIRROR
Display
:
00:00
12:00
12:00
12:30