Inserting The Battery - Hilti SL 2-A12 Manual Del Usuario

4.3 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5 Operation
5.1 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.

5.2 Inserting the battery

CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals
and the contacts on the product are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the product so that it cannot
drop out and fall, thereby presenting a hazard to other persons.
▶ Insert the battery and check that the battery is securely seated in the
device.
5.3 Removing the battery
1. Press both release buttons.
2. Pull the battery to the rear and out of the product.
5.4 Pivoting the head of the lamp
1. Pull out the retractable hook.
When you suspend the lamp using the retractable hook, check the
load-bearing capacity of the point from which the lamp is suspended.
2. Pivot the head of the lamp upwards.
16 English
21.6 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
2171355
*2171355*