cecotec PROCLEAN 8110 FULL INOX Manual De Instrucciones página 53

3. Free distance from the top surface: 20 cm.
4. From the microwave to the ground: 85 cm.
- The appliance must be placed at least 5 m away from TVs, radios, or antennas.
- To avoid electric shock, the microwave must be installed in such a way that the plug is
accessible and that an effective earth connection is provided in the event of a current
leakage.
- The microwave door must be closed in order to operate.
- In case there is any manufacturing remains in the microwave cavity or on the heating
elements, leave the microwave open to ensure good ventilation. In such case, it is
recommended to heat a glass of water at high power for several times.
Warning:
Do not try to remove the mica plate. This component is essential for the appliance to work
properly. The mica plate must be clean to ensure its proper operation.
3. OPERATION
Before cooking
Connect the appliance to a power outlet. Once connected, the LED light will flash 3 times and
will show 1:00.
Time/weight knob
Cooking time and food weight can be increased or decreased during operation, depending on
the mode, by turning the Time/Weight knob.
Pause/Cancel
- Before operation, press the button once to reset the settings and return to factory state.
- During operation: press once in order to interrupt operation or press twice in order to
cancel pre-set cooking program.
Reminder
Once the pre-set cooking process is over, END will appear on the LED display panel and the
microwave will beep 3 times. Press Pause/Cancel button or open the microwave door in order
to stop the alarm, otherwise the alarm will sound at an interval of 3 minutes.
Instant cooking
From the initial position, press the Start button, the microwave will automatically operate
at high power for 1 minute. Cooking time can be increased or decreased during operation by
turning the Time/Weight knob.
ENGLISH
PROCLEAN 8110 FULL INOX
53