Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting the hob to the mains power supply
The power supply should be connected in compliance with the
relevant standard, or a single-pole circuit breaker. The
method of connection is shown below.
1. If the cable is damaged or needs replacing, this should be
done by an after-sales technician using the proper tools, so
as to avoid any accidents.
2. If the appliance is being connected directly to the mains
supply, an omnipolar circuit breaker must be installed with
a minimum gap of 3mm between the contacts.
3. The installer must ensure that the correct electrical
connection has been made and that it complies with safety
regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by
a properly qualified person.
VI330
55
Publicidad
