McCulloch MTO001 Manual De Instrucciones página 10

WARNING:
steps after each use:
• Allow attachment and gearbox to cool be-
fore storing or transporting.
• Position attachment so that any sharp ob-
ject cannot accidentally cause injury.
• Store the attachment in a dry, well venti-
lated area out of the reach of children.
SEASONAL STORAGE
Prepare attachment for storage at end of sea-
son or if it will not be used for 30 days or more.
EC DECLARATION OF CONFORMITY
Issuer's name: Husqvarna AB, SE-561 82 Huskvarna, Sweden (Tel: +46-36-146500)
Husqvarna AB claims sole responsibility for the blower attachment platform(s) UHTA representing
model(s) Universal MTO001 from 2014 serial numbers and on-wards. The platform number and model
number are clearly stated in plain text on the type plate along with the year with subsequent serial
numbers.
The object of the declaration described above is in conformity with the requirements of the
Council's Directives:
2006/42/EC "relating to machinery" 17 May 2006
2000/14/EC "relating to noise emissions in the environment" 08 May 2000
In accordance with Annex V, the declared sound values are:
The measured sound power is 109 dB and the guaranteed sound power is 114 dB
The following standards have been applied:
EN ISO 12100:2010, EN ISO 10517:2009
TÜV Rheinland N.A. has carried out a voluntary examination on behalf of Husqvarna AB, providing
AK72133726 - Certificate of Conformity and is approved for the following platforms/models:
LT28CSHV, LT28CSJN, LT28CSMC, LT28CSPR, 4S28CSPR, AT26CSMC, A05328CSHV
This certificate is applicable to all manufacturing locations and Countries of Origin, as stated on the
product.
The supplied cultivator attachment conforms to the example that underwent examination.
Signed on behalf of: Husqvarna AB, Huskvarna, Sweden, 2013-12-01
Ronnie E. Goldman
Director of Engineering
(Authorized representative and responsible for technical documentation)
01-EN
SPECIFICATIONS
Blade Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16"(406mm)
Max. Cutting Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5/8"(15mm)
Angle Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0-90
Blade Arbor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1" (25.4mm)
Dry Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.27 kg
STORAGE
Perform the following
TECHNICAL DATA SHEET
If your hedge cutter attachment is to be stored
for a period of time:
• Clean the entire attachment.
• Store in a clean dry area.
• Clean all parts and check for damage.
Have damaged parts repaired or replaced
by an authorized service dealer.
• Keep all nuts, bolts, and screws tight.
• Lightly oil external metal surfaces, includ-
ing the blade.
10
o