Remote control:
1. On/Off Button
2. BT pair
3. Volume +/-
4. Previous/Next
5. Play/Pause
(BT mode)
6. Treble +
7. Treble -
8. Mode
9. Bass +
10. Bass -
1
5
4
(BT mode)
6
8
7
Connect:
1. Connect the power cord to the back of the
amplifier then connect it to a wall outlet.
2
2. Connect your TV with a HDMI cable,
remember to select the HDMI ARC/CEC on your TV.
(only works on compatible TV's)
4
3
3. Turn the power button to the On position, after two
seconds the unit will enter working status and the
input indicator will lit up.
9
4. Press the Mode on the remote or push the volume
knob to choose between TV or BT source.
Note: The amplifier will shut off automatically if the
10
temperature exceeds 85°C, to indicate this the Power
indicator will turn orange. The amplifier will re-start
automatically when the temperature has dropped
below 60±10°C.
Bluetooth Pairing:
1. Choose Bluetooth input on the remote (or push the
selector button) to activate the Bluetooth source.
2. Activate Bluetooth on your phone/tablet and
start searching for new Bluetooth devices.
3. When your phone/tablet finds the Tangent
Ampster TV II, choose this unit and begin pairing up.
(You can force the Ampster TV II into pairing mode, with a press on BT pair)
(UK)