Tangent Ampster TV II Manual Del Usuario página 6

Button/Indicator Function
Power/Standby indicator
Power: Power on-The product in power off status, then push the power source button on rear panel at
"ON" position the LED indicator blinks one time and the startup sound from electric relay in the unit,
after about 2 seconds the amplifier will be in working status.
Power off:
Push the power source button at "OFF" position, then the close sound from the electric relay and unit
go into power off status.
Standby:
Press the standby button on the remote control, or push the Volume/selector button (3-4sec).
Then the unit will go into standby, and the standby LED will be red color. The unit is in standby status.
(When the Ampster TV II goes into auto standby when inactive (no signal) in 15min, you can wake it up via blue-
tooth signal).
Power on : Press standby on the remote control or push the Volume/selector button.
(from standby mode)
And after about 2 seconds the amplifier will be in last time working status before standby.
In TV mode using HDMI arc/cec, the Ampster TV II will power ON & OFF when you turn your TV on &
off.
Bluetooth input indicator
When Bluetooth mode is selected indicator lights. Solid when connected to a device and flashing when
in pairing mode.
Volume and input switch button
This selector can adjust volume (turn left or right) and also switch the input mode (push)
(For standby push and hold the button)
In TV mode using HDMI arc/cec, the volume is controlled by your TV.
(UK)