Toto Mercer Manual De Instrucciones página 8

shower installation
install canopy onto shower arm. Wrap
threads with supplied thread tape. to
prevent marring the surface, use a strap
wrench or use the end of the arm for
leverage.
install shower head with wrench. hand
tighten only
spout installation
note: the lloyd spout can only be installed
via slip-on.
-For slip-on installation
place pipe tape onto thread. install
the slip-on adapter on to the
elbow. remove the existing nipple
if necessary. slide the spout into
position and secure with set screw.
-For ips installation
remove the slip-on adapter. apply
pipe tape onto the nipple threads
and screw the spout into a secure
position.
8