Maytag SkyBox MBV1976AA Manual Del Usuario página 10

Changing SkyBo×
TM
Dispmay Graphics
Your SkyBox
TM
personal beverage vendor comes with a
standard front panel. To purchase customized,
interchangeable front and side display graphics visit
your local retailer or ww_skyboxbymaytag=com.
Make sure SkyBox
TM
personal beverage vendor is
OFF and the power cord is unplugged.
STEP 1 - Install Side Display Graphics
STEP 2 - Change Front Display Graphic
• Remove top of SkyBox
TM
personal beverage vendor
by lifting up the tabs at rear of top panel. Pull top
cover back slightly to remove from frame. Set aside.
]
m i
Flip up the graphic access cover, exposing a screw
and the top edge of the front display graphic.
Remove the screw.
Gently press hands onto front display graphic within
frame and slide it up and out of the personal
beverage vendor.
Slide the new customized display graphic into the
frame, making sure the panel slides behind the lower
edge of the frame opening.
Flip the display graphic access cover back down into
place.
• Slide one customized display graphic into each side
of the SkyBox
TM
personal beverage vendor, tucking
the panels in at the bottom within the grooves in the
frame.
• Replace the top cover by sliding hooks into front and
then pressing down tabs at the rear.