Intenso WPD10000 Manual Del Usuario página 15

Normal charging:
Use a standard USB power supply or a port with USB on a computer to charge the Powerbank via
the USB-C Out/In port (maximum 5V-3A = maximum 15 wa琀琀s).
Fast charging:
To charge the Powerbank with a maximum power (18 wa琀琀s), please use a power supply unit sup-
por琀椀ng the Power Delivery Standard (PD). The fast charging is indicated by an LED as well which
now lights up blue. If the LED does not change from white to blue, your power supply unit or the
cable used are incompa琀椀ble with the PD standard and the Powerbank will be charged normally.
b) Charging devices with the Powerbank
Wireless charging:
Ac琀椀vate the wireless charging func琀椀on by pressing the On/O昀昀 bu琀琀on on the Powerbank. Now
place your Qi-capable device centrally across the wireless charging area. The charging process
starts automa琀椀cally. If this is not the case, please check whether
the Powerbank is adequately charged. For this purpose, at least one of the status LEDs
must be permanently lit.
a foreign body is located between the devices.
your device is Qi-capable.
where the correct posi琀椀on for wireless charging is located on your device. You may
possibly have to place it in another posi琀椀on.
The ac琀椀vated wireless charging process will be displayed by an orange LED.
The posi琀椀oned device will be charged with a maximum of 10 wa琀琀s. The amount of wa琀琀 which
are actually transferred depends on the charged device. If another device is charged through
a cable, the maximum power will be reduced to 5 wa琀琀s.
In order to end the charging process, you just have to remove your device from the Power-
bank.
The ambient temperature level in昀氀uences the charging speed, since the charging control of
most mobile devices reduces the power consump琀椀on when reaching higher temperatures.
Wired charging:
This Powerbank is equipped with two USB-A ports (USB-A 1 Out/USB-A 2 Out) and a port
USB-C (USB-C Out/In).
The two USB-A ports support the Qualcomm Quick Charge (QC) 3.0 standard (normal out-
put: 5V-3A max.; Output QC: 5V-3A, 9V-2A, 12V-1.5A = max. 18 Wa琀琀). The connec琀椀on USB-C
supports the Power Delivery (PD) standard (normal output: 5V-3A max.; PD output: 5V-3A,
9V-2A, 12V-1.5A = max. 18 Wa琀琀) as well a the above-described QC standard.
You can charge several devices at the same 琀椀me with the Powerbank as well, for example
a tablet on the out port USB-A 1 and a smartphone on the Out/in port of USB-C or without
wire through the Qi area. In this case, please note that neither the QC nor the PD standard
are available, but a maximum of 5V with a total of maximum 15 wa琀琀s (maximum 5 wa琀琀s
wireless) can be reached.
To charge your device, just connect the supplied cable to the connec琀椀on USB-C (USB-C Out/
In) of the Powerbank and the other end to the connec琀椀on USB-C of the device to be charged.
EN - Page 4 of 8