Step 1: Select a preset footswitch, then press the footswitch again to enter the control mode (the light of the preset footswitch will light up green). Then the other two
footswitches will become CTRL footswitches, and the screen will display the control contents of each CTRL footswitch.
Step 2: Click the CTRL button to enter the CTRL Settings, the default preset footswitch is displayed as Enter/Exit, and the other two footswitches show what they control.
Rotate the Value Knob to select the CTRL footswitch you want to change content and press the Value Knob to select it (the content bar shows green), then rotate the Value
Knob to choose the effect content, and finally press the Value Knob to confirm it (the content bar shows blue).
Step 3: The CTRL footswitch settings can be saved to each preset.
2. EXP1 Pedal Setting
The EXP1 has On/Off states (light on/off on the panel), the user can define the functions and parameters to be controlled in these two states. For example, you can set the Off
state as a volume pedal and the On state as a Wah. Press the front of the pedal (toe down) firmly to switch the EXP1 On/Off states.
Note: On/Off of the EXP1 only means two states of operation, and Off state doesn't mean the pedal is not working, unless it is set to No Function.
Follow the steps to define the pedal functions:
Press the EXP button on the panel to access pedal function settings. Select EXP1, then set the functions controlled by EXP in On and Off states according to the menu