Output Setting
Click the OUTPUT button can set whether XLR and 1/4 " outputs have CAB simulation effect. You may need to turn off the Cab simulation effect in the following situations:
This setting only changes whether CAB effects are assigned to XLR or 1/4 "outputs and does not turn off the CAB block that is already enabled in preset by default. Therefore,
the user can choose the XLR with CAB simulation for output to the mixer, and the 1/4 "without CAB simulation for output to the guitar amp. When XLR and 1/4 " settings are
different, the CAB block position is automatically moved to the last position in the effects chain.
Locking the Touch Buttons
① Press CTRL and OUTPUT buttons at the same time to lock all panel touch buttons.
② Pressing the touch buttons will not be operated after locking, and the "A" light of Arena's logo in the upper left corner will be completely off to indicate that it is currently locked.
③ Once press CTRL and OUTPUT buttons at the same time to unlock, the "A" backlight of Arena indicates that it has been unlocked.
ARENA2000 Editor Software
① The ARENA2000 can be used to edit tones, backup presets, and update
firmware through Donner Control. Please download [Donner Control] at
https://www.donnermusic.com/support/downloads/list to experience the full
functionality of ARENA2000 and get the latest firmware version.
② Follow the instructions to install the software on the computer and then connect
the computer to the ARENA2000 by using a USB Type C cable.
The ARENA2000 PC control software currently only supports Windows and some
MacOS systems.
Output to the pre-amp or power-amp of a guitar amplifier.
Add CAB simulation to the recording in DAW.
Use other CAB simulation devices.
Locked mode
10
Unlocked mode
TYPE C