Cameo CLP56RGB10 Manual De Usuario página 9

The Cameo PAR 56 CAN has two DMX modes to choose from, 4 channel or 6
Channel. To access the 4 Channel mode, press the mode button to show a red
dot illuminated under the first digit of the DMX address. The unit is now ready
for use in 4 channel mode
CHANNEL
CH1
CH2
CH3
CH4
To access the 6 Channel mode, press the mode button to
show NO red dot under the first digit of the DMX address.
The unit is now ready for use in 6 channel mode
CHANNEL
CH1
CH2
CH3
CH4
CH5
CH6
To change from 4 channel to 6 channel mode, press ONLY the mode button repeatedly until you return to the
DMX control mode.
DAISy CHAIN CONNECTION
1) Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first fixture
2) Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the
input connector of the next fixture consisting of a (male) 3 pin connector. Proceed to connect from the output as
stated above to the input of the following fixture and so on.
VALUE FUNCTION
000-255 RED (0-100%)
000-255 GREEN (0-100%)
000-255 BLUE (0-100%)
000-255 MASTER DIMMER (0-100%)
VALUE
000-255
000-255
000-255
0-255
0-16
17-255
0-31
32-95
96-159
160-223
224-255
DMX CONTROL MODE:
FUNCTION
RED (0-100%)
GREEN (0-100%)
BLUE (0-100%)
Master dimmer (0-100%)
No function
Strobe/Speed Adjust/Sound Sensitivy Adjust
No function
Colour mixing
RGB colour change
7 colour change
Sound activation
Red Dot
9