Samsung DV220AG Serie Manual Del Usuario página 24

CLEAN THE LINT FILTER
,, After each load.
• To shorten drying time.
To operate more energy efficiently.
Cleaning the Lint filter
1. Pull the case-filter out of the dryer.
2. Scrape the dust from the top part of the filter using your fingers.
3. Open the bottom cover and scrape the dust in the same way.
4. Shake off the dust, close the cover and install it in its place.
[_Do not operate your dryer without the lint filter in place.
LOAD THE DRYER PROPERLY
Place only one washload in your dryer at a time.
Mixed loads of heavy and lightweight fabrics will dry differently, which may result in lightweight fabrics
being dry while heavy fabrics remain damp at the end of a drying cycle.
Add one or more similar items to your dryer when only one or two articles of clothing need drying.
This improves the tumbling action and drying efficiency.
,, Overloading restricts tumbling action, resulting in uneven drying as well as excessive wrinkling of some
fabrics.
G ETTi NG STARTE D
1. Load your dryer loosely- DO NOT overload.
2. Close the door.
3. Select the appropriate cycle and options for the load (see pages 20, 21).
4. Press the Start/Pause button.
5. The dryer indicator light will illuminate.
6. The estimated cycle time will appear in the display.
The time may fluctuate to better indicate drying time remaining in the cycle.
When the cycle is complete, the Door Lock light will go out and "End" will appear in the display.
Pressing Power cancels the cycle and stops your dryer.
The Drying, Cooling, and Done indicator lights will illuminate during those portions of the cycle.
24 operatng hstructions, tps
DV220AE-02810A EN.indd 24 2010-01-28 &_t_._ 3:53:33