Publicidad
Idiomas disponibles
Idiomas disponibles
3.5 - DESCRIPTION OF THE AIR CONDITIONER FUNCTIONS
3.5.1 - Main switch-on and running management
• The machine may be regulated using the remote control.
In order to transmit commands to the indoor appliance, point the front of the remote
control toward the appliance's control panel.
The device emits a beep when it receives a command.
• The maximum distance from which the appliance can be controlled is about 8
meters (with charged batteries).
3.5.2 - ECO key
• Pressing the B2 key on the remote control activates the energy saving function,
automatically optimizing the machine functions, the D11 symbol appears on the
display.
3.5.3 - Turning the unit ON/OFF
• Press key B1 on the remote control to activate or deactivate (stand-by) the air
conditioner.
The control system of the unit is equipped with memory, for this reason all the
settings won't be lost when shutting off the appliance itself.
In case of prolonged stop of the machine, it must be deactivated
turning the main switch off or unplugging the machine from the
mains.
3.5.4 - Operation in "Cooling" mode only
• When used in this mode, the air conditioner dehumidifies and cools the room.
• To activate this mode, press the key B4 on the remote control several times until
the D3 symbol appears on the display.
• In this run mode, the required temperature and fan speed can be set.
After three minutes (as a maximum) from activation in this operating mode the
compressor will start and the appliance starts emitting cold air.
• The start of the compressor is
indicated by the lighting up of
the LED B (green) located on
the console (fig.30).
EN - 32
30
G
LED D
LED C
LED B
H
LED A
Publicidad
