Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE APPLIANCE
Before operation, make sure that the appliance is unplugged and the knob is turned to the "O" position.
NOTES FOR OPERATION
• The bottle can not be heated if there is no water in the inner chamber of the appliance.
• The inner chamber can not be overfilled.
• Only place a single milk bottle in the inner chamber of the appliance at a time.
• Immediately remove the bottle from the appliance when the suggested heating time is reached to
prevent overheating the milk.
• After use, turn the knob to the off ("O") position.
Fast milk warming I
1. Place the bottle loaded with milk in the inner chamber.
2. Pour the appropriate amount of water in the inner chamber according to the
amount of milk in the bottle.
If you have a large volume of milk (the milk level is higher than the inner
chamber), fill with water to approximately 2 cm below the top of the
bottle warmer.
3. Plug in the appliance.
4. Turn the knob to the position "I" and the appliance will start to work.
CAUTION : Please be careful to prevent your fingers from being burnt during heating process.
5. Keep the appliance working for the heating time in the section of "Suggested Heating Time Chart".
6. When the suggested heating time is reached, remove the bottle from the bottle warmer to prevent
overheating the milk.
Always check milk temperature before feeding your baby. Turn the knob to the off
7.
("O") position.
Fast milk warming II
1. Place the bottle loaded with milk in the inner chamber.
2. Pour the appropriate amount of water in the inner chamber according to the
amount of milk in the bottle.
If you have a large volume of milk (the milk level is higher than the inner
chamber), fill with water to approximately 2 cm below the top of the
bottle warmer.
3. Plug in the appliance.
4. Turn the knob to the position "II" and the appliance will start to work.
CAUTION : Please be careful to prevent your fingers from being burnt during heating process.
5. Keep the appliance working for the heating time in the section of "Suggested Heating Time Chart".
6. When the suggested heating time is reached, remove the bottle from the bottle warmer to prevent
overheating the milk.
Test milk by placing drops onto the inside
of your wrist.
4
Publicidad
