Descargar Imprimir esta página

THOMSON WARMY BABY Manual De Instrucciones página 36

Calienta biberones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Always check milk temperature before feeding your baby. Turn the knob to the off
7.
("O") position.
Suggested Heating Time Chart
NOTE : The temperature of the water used for the test ranges from 16°C to 20°C. And the heating time as
below is only for reference.
Function
Milk amount
Fast milk
warming I
180 – 330 ml
Fast milk
warming II
180 – 330 ml
CLEANING AND MAINTENANCE
CAUTION: Always switch off and unplug the appliance from the mains socket and allow
it to cool completely before cleaning it. Never immerse the appliance or power cord into
water or any other liquid for cleaning.
Always pour any remaining water out of the appliance after each use.
Wipe the outside and inside of the bottle warmer with a damp cloth.
Do not use abrasive or chemical cleaning agents.
DESCALING REGULARLY
It is recommended to descale the bottle warmer at least once a month to ensure it works
efficiently.
1. Unplug the bottle warmer and allow to cool down completely before descaling.
2. Fill the inner chamber with white vinegar or citric acid and water ( white vinegar /
citric acid : water = 3:1).
Use filtered water instead of tap water.
Test milk by placing drops onto the inside
of your wrist.
Milk temperature
60 – 180 ml
About 30°C – 44°C
60 – 180 ml
About 35°C – 49°C
Heating time
About
60 – 120 mins
About
60 – 120 mins
5
Material of
milk bottle
Plastic
Plastic

Publicidad

loading