Descargar Imprimir esta página

Weed Eater LE Serie Manual De Instrucciones página 7

Ocultar thumbs Ver también para LE Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

CHECK
MUFFLER
MOUNTING
SCREWS
Once
each year,
ensure
muffler
mounting
screws
are secure and tightened
properly
to
prevent
damage.
• Remove
muffler cover.
• Loosen
and remove both screws
from the
exhaust
diverter.
• Remove
the exhaust
diverter and spark ar-
resting screen.
• Instal_ new spark arresting
screen.
• Reinstall exhaustdiverterand
bothscrews.
Tighten screws
securely.
• Reinstall
muffler cover.
NOTE:
If any part of the muffler is cracked,
broken or damaged,
we recommend
that the
muffler be replaced.
Screw
Holes
NOTE:
The muffler mounting
screws
are lo-
cated
behind
the cap
screws.
The
cap
screws
must
be
removed
to access
the
mounting
screws.
• Remove
muffler cover.
• Loosen and removethe
2 cap screws
from
the muffler mounting
screw
holes.
• Tighten the 2 mounting
screws
(1OOin/Ibs).
• Reinstall and tighten the 2 cap screws
(100
in/Ibs).
• Reinstall
muffler cover.
INSPECT
MUFFLER
AND
SPARK
ARRESTING
SCREEN
WARNING:
The muffler on this prod-
uct contah_s chemicals
known to the State of
California
to cause cancer.
As the unit is used, carbon deposits
build up
on the muffler
and spark
arresting
screen,
and must be removed to avoid creath_g a fire
hazard
or affecting
engine performance.
TOP VIEW OF MUFFLER
Diverter
X
\
)
/
/
i-
Replace
the spark arresting
screen
every
50
hours
of operation
or if any damage
or breaks
in the screen
are noted.
NOTE:
De not attempt
to clean
the spark ar-
resting
screen,
We recommend
all service
and adjustments
not listed in this manual
be performed
by an
authorized
service
dealer.
CARBURETOR
ADJUSTMENTS
Your carburetor
is equipped with limiter caps,
Adjusting
the
carburetor
is a compficated
task,
We recommend
that you take your unit
to an an authorized
service
dealer.
Damage
will occur if you turn the needles
beyond the
limiter stops.
ill
r=WARNING:
Perform
the
following
steps after each use:
• Allow engine to cool,
and secure
the unit
before storing or transporting.
• Store unit and fuel in a well ventilated
area
where fuel vapors cannot
reach sparks
or
open flames
from water
heaters,
electric
motors or switches,
furnaces,
etc.
• Store unit with all guards in place. Position
unit so that any sharp object cannot acci-
dentally
cause injury.
• Store unit and fuel well out of the reach of
children.
NEED ASSISTANCE?
Call: 1-800-554-6723.
NEED A SERVICE
PART?
Contact your dealer.
-7-

Publicidad

loading

Este manual también es adecuado para:

Le bv200Le bv1650Le bv1800Le bv1850Le bv2000