Publicidad
Idiomas disponibles
Idiomas disponibles
USINGTHE SOLUTION CONTROL DIALANDADJUSTING THESOLUTION
•
The Solution
Control
Dial controls
the amount
of cleaning
solution
that is added
to the steam.
It does
not adjust the amount
of steam,
only the cleaning
solution.
•
If you wish to clean with steam
alone,
simply turn the Solution
Control
Dial to "STEAM
ONLY".
Now
every time you press
the Steam Trigger,
you will release
steam
alone.
•
If you wish to clean
using
cleaning
solution,
simply
turn the Solution
Control
Dial to the desired
setting.
Now when pressing
the Steam
Trigger,
the steam
mop will release
the amount
of cleaning
solution
that is indicated
on the Solution
Control
Dial as well as a steady
flow of steam.
STEAMCLEANINGHARD FLOORS
•
Attach
Microfiber
pad.
Plug
in and press
the
power button on the steam cleaner (2.13).
•
The
steam
cleaner
will
take
roughly
30
seconds
to
be
ready
to
produce
steam.
Once
steam
is ready
to be produced,
the
green
"steam
ready"
indicator
will illuminate.
•
To recline
the steam
cleaner
place
foot on
Mop Head
and gently
pull handle
backwards
(2.14).
•
To produce
steam
squeeze
the Steam Trigger
(2.15).
•
Move
the Steam
Mop slowly
backwards
and
forwards
across
the
floor
(2.16)
paying
particular
attention
to high traffic
areas.
ToDisinfect H ardSurfaces
•
Use
steam
alone.
Do
not
use
cleaning
solution.
Turn Solution
Control
Dial to "STEAM
ONLY".
•
Connect
the hard floor
Microfiber
Pad
(see
2.6, A) and run a minimum
of 4 strokes
at a
medium
pace
(5-7
seconds
per
32" stroke)
across same
area. Allow to air dry.
Publicidad
