Publicidad
Idiomas disponibles
Idiomas disponibles
4. When the charging process is complete, unplug the
power cable of the charger from the power supply.
Additional charging socket on device
1. Open the cover of the charging interface.
Illustration G
2. Insert the connector of the charger into the charging
interface.
3. Connect the power cable of the charger to the power
supply.
The charging process starts automatically.
4. When the charging process is complete, unplug the
power cable of the charger from the power supply.
Operation
Note
The appliance cannot be turned on without the
HEPA filter or the dust container. Ensure the HEPA
filter and the dust container are properly positioned
in the appliance before using the appliance.
1. Press the ON/OFF button to start vacuuming up
dust / dirt.
Illustration H
By default, the appliance runs in the middle mode.
Press the ON/OFF button again to switch the device
off.
2. You can adjust the suction power while vacuuming
via the Power Mode button.
Illustration I
3 suction modes are available with full speed, medi-
um speed and energy saving modes.
The table below describes the details of suction
power stages:
Suction
Full speed
mode
mode indicator
status
Full speed
On
mode
Medium
Off
speed mode
Energy sav-
Off
ing mode
Indicators
Illustration J
Charging / discharging / battery indicator
1
Floor nozzle indicator
2
Full speed mode indicator
3
The table below describes the meanings of LED indica-
tors on the appliance:
Indicators
Status /
Color
Battery indi-
Flashing
cator - charg-
(green)
ing
Always on
(green)
Description
To capture heavy and
deep-down dirt
To clean up soft or hard
floor at optimized and
moderate speed
Long-lasting feature
designed for the long-
running job
Description
Charging
The battery power is full.
(The indicator will go out
after 5 minutes.)
Indicators
Status /
Color
Battery indi-
Always on
cator - dis-
(green)
charging
Always on
(red)
Flashing
(red)
Floor nozzle
On
indicator
Off
Full speed
On
mode indica-
tor
Off
LED lights on
Always on
the floor noz-
(white)
zle
Always on
(red)
Flashing
(red)
Electric floor nozzle
Attach the soft brush roller floor nozzle to clean carpets
and floors, etc.
Illustration K
One click to clear out dust
1. Press the button on the left to clear out dirt in one
step.
Illustration L
Standard accessories
Attach the fabric nozzle to clean upholstered furni-
ture, mattresses, laced curtains, etc.
Attach the crevice nozzle.
Illustration M
Illustration N
This is used for cleaning joints, grooves between
1
doors and windows, tiny slits, etc.
This is used for cleaning delicate objects with care,
2
e.g. bookcases, handicrafts, etc.
Optional accessories
Attach the mattress nozzle to clean mites / dust in
the mattresses and pillows, etc.
Attach the dusting brush to clean wall surfaces, cur-
tains, gaps in furniture, etc.
You need to use the flexible hose to connect the
dusting brush and the handy vacuum cleaner.
Attach the car nozzle to clean dirt / dust in the car,
etc.
You need to use the flexible hose to connect the car
nozzle and the handy vacuum cleaner.
Illustration O
Description
The battery power is
above 10%.
The battery power is be-
low 10%.
Dust container not in-
stalled or installed incor-
rectly.
The brush roller of the
floor nozzle is running.
The brush roller of the
floor nozzle is clogged.
The appliance is running
in full speed mode.
The appliance is running
in energy saving / medium
speed mode.
The battery power is full.
The battery power is be-
low 10%.
The brush roller of the
floor nozzle is clogged.
Publicidad
