Bosch HBL33 Manual De Instalación página 5

Dimensions for 27"
Wall-Mounted Units
Single Oven 27"
25u2"
+ (64800)
'li
24" _—
(10mm) (Se
a vow
(680mm) oaiane" (718mm)
| (630mm) .
pe 4 -
vont 5 , 27 1/16" |
(738mm) | \C7mm)
: Z min, 494" (121mm)
max. 38" 964mm)
23776" (606mm)
"LD 22° (559mm)
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wail or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back flush
with the bottom and the side of the opening. The supporting
base must be well secured to the floor/cabinet and level.
Note:
The conduit box must be installed either above or below
the unit. If the conduit box is installed below the unit, a 2"
diameter hole or space is required between the back wall
and the right rear of the 2x4 supports.
The cabinet base must be flat and capable of supporting a
weight of at least 193 Ibs (87 kg).
Double Oven 27"
2512"
(61 om an)
26/4"
«=. (680mm)
mn, QING"
+ (630mm)
ta
518"
sta (1299mm)
(1314mm} | |
: "ee
(1264mm)
| me. min, 444 "(121mm
" | 937/8" (606mm)
we
. mm
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wall or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back flush
with the bottom and the side of the opening. The supporting
base must be well secured to the floor/cabinet and level.
Note:
The conduit box must be located above the unit to facilitate
connecting and servicing.
The cabinet base must be flat and capable of supporting a
weight of at least 361 Ibs (164 kg).
English 3